1-844-4-FLOORZ (844 435-6679)

Highly abrasive scrubbing tools are not recommended as they can damage your Flooring.
Never use ammonia or bleach to clean your Resilient Flooring/Vinyl Flooring.
Due to the high temperatures, steam mops may cause damage to Resilient/Vinyl Flooring. Review the manufacturer guidelines for your flooring before using a steam mop. 

  1. Remove loose dirt with a soft bristle broom.

  2. Clean with a damp mop for everyday care.

  3. Wash the floor occasionally with a gentle (non-abrasive) floor cleaner - always follow cleaning product instructions and adhere to cautions before use.

  4. Do not use detergents, abrasive cleaners or “mop and shine” products. These may leave a dull film on your Flooring.

  5. When using a vacuum cleaner, disengage the beater bar or use the “bare floor” setting to avoid damaging your flooring.

Things that Won’t Wipe Up


Resilient/Vinyl Flooring has a protective film. But there’s some stuff that just won’t come off easily. Glue, asphalt, chewing gum, oil, grease, candle wax and tar are hard to remove. Follow these simple steps to get stubborn stains off your Resilient/Vinyl Flooring.



Carefully remove excess residue with your fingernail.


  • Clean with Vinyl Flooring cleaner using a nonabrasive white scrubbing pad.
  • Rub lightly with odorless mineral spirits or isopropyl alcohol.
  • Scuffs and Smudges
  • Rubber heel marks, shoe polish, and other scuffs and smudges are unsightly. Follow these steps to remove them from your Resilient/Vinyl Flooring.



Rub the scuff with your fingertip or an eraser.


Scrub the area with a floor cleaner and a nonabrasive white scrubbing pad, following instructions on the label.


Caution: Isopropyl alcohol, odorless mineral spirits and paint thinner are flammable solvents.

Follow these steps to remove the spill:


Gently rub the area with your finger or an eraser (avoid using sharp items, which can scratch your Flooring.

  • Rub lightly with isopropyl alcohol on a clean, white cloth.
  • If the satin still shows, use odorless mineral spirits or turpentine on a clean, white cloth.
  • If the stain still shows, use a clean, white cloth to very carefully wipe the area with fingernail polish remover containing acetone.
  • Scrub the area with a floor cleaner and a nonabrasive white scrubbing pad, following instructions on the label.

Clean the area with Vinyl Flooring cleaner.


  1. Scrub with a nonabrasive white scrubbing pad.
  2. Rub with isopropyl alcohol. (Only for pen ink, permanent marker, nail polish, hair dye).
  3. For rust stains, treat with lemon juice or cream of tartar.
  4. Paint/Varnish
  5. Harsh fluids can also stain your Resilient/Vinyl Flooring. Some examples include dry cleaning fluids, lacquer, paint, nail polish, wood stains and varnish.

Here are specific steps for challenging spills and stains. Unless stated otherwise, use a clean, white cloth or towel when cleaning Resilient/Vinyl Flooring products. Always rinse the area with clean water as your final step.

Common causes include blood, catsup, mustard, cleaners, dyes, food, candy, juices, grass,rust and pet accidents. To remove these and more, follow these steps:

How to Treat Stains & Spills on Resilient/Vinyl Flooring

To Prevent Scuffs When Moving Furniture


  1. Make sure furniture legs are smooth and won’t mar your Resilient/Vinyl floors.
  2. Replace any small, narrow, metal, or dome-shaped glides with smooth protectors that are in flat contact with the floor.
  3. Place heavy-duty furniture casters or cups at the contact points of furniture or appliances you don’t often move.
  4. Never push, pull, or drag furniture, appliances or other items across the floor. Always lift and carry.
  5. If you have to slide furniture or appliances, lay a plywood panel on your floor and “walk” the item across the panel.

Resilient Flooring /Vinyl Flooring Care 

Resilient Flooring Care / Vinyl Flooring Care​